在註塑過程中, 各種挑戰和困難是不可避免的. 如果是 塑膠射出成型, the potential defects are numerous and complex. At DAYIN Plastics, we provide an overview of some of the most common issues encountered during injection molding, with the goal of helping you first identify these common problems. In subsequent discussions, we will explore solutions to these defects in more detail.
- Characteristics of Injection Part Defects: These occur when the injection process is incomplete, either due to the mold cavity not being fully filled with plastic or the omission of key steps in the injection process.
Possible causes of common issues include:
(1) Insufficient injection speed.
(2) Inadequate plastic feed.
(3) No cushion left at the end of the extruder screw’s stroke.
(4) Variations in operation time.
(5) Low barrel temperature.
(6) Insufficient injection pressure.
(7) Blocked nozzle section.
(8) Heater for the nozzle or barrel malfunctioning.
(9) Short injection time.
(10) Plastic adhering to the inner wall of the hopper throat.
(11) Injection machine capacity too small (either in terms of injection weight or melting capacity).
(12) Low mold temperature.
(13) Failure to properly clean rust inhibitors from the mold.
(14) Damaged check ring causing backflow of material.
大銀塑膠有限公司, Ltd. has been specializing in mold manufacturing for 30 年. As an experienced OEM/ODM injection molding contractor, we offer one-stop services. We excel in product structure optimization to reduce molding costs. 擁有完整的產品設計與製造團隊, we provide excellent design services and have advanced mold processing equipment. With over 30 多年經驗, a 50,000-square-meter production base, a team of 50+ R&D professionals, 以及以上 100 註塑機, we deliver comprehensive plastic product manufacturing solutions.